To configure a unified policy using dynamic applications:Ĭonfigure security zones and interfaces. For instructions on how toĭo that, see Using the CLI Editor in Configuration The following example requires you to navigate various set security dynamic-application profile profile1 redirect-message type custom-text content "THIS APPLICATION IS BLOCKED" set security policies from-zone trust to-zone untrust policy policy-1 match source-address any set security policies from-zone trust to-zone untrust policy policy-1 match destination-address any set security policies from-zone trust to-zone untrust policy policy-1 match application any set security policies from-zone trust to-zone untrust policy policy-1 match dynamic-application junos:YAHOO-MAIL set security policies from-zone trust to-zone untrust policy policy-1 match dynamic-application junos:FACEBOOK-ACCESS set security policies from-zone trust to-zone untrust policy policy-1 then reject profile profile1 set security policies default-policy permit-all set security zones security-zone trust host-inbound-traffic system-services all set security zones security-zone trust interfaces ge-0/0/0.0 set security zones security-zone untrust host-inbound-traffic system-services all set security zones security-zone untrust interfaces ge-0/0/1.0 set interfaces ge-0/0/0 unit 0 family inet address 4.0.0.254/24 set interfaces ge-0/0/1 unit 0 family inet address 5.0.0.254/24
Level, and then enter commit from configuration mode. To quickly configure this example, copy theįollowing commands, paste them into a text file, remove any line breaks,Ĭhange any details necessary to match your network configuration,Ĭopy and paste the commands into the CLI at the hierarchy You must delete all unified policies to avoid a commitįor example on configuring a unified policies, see Configuring Unified Security Policies. If you are downgrading from Junos OS Release 18.2R1 to
The following error message if you attempt to do so: Traditional AppFW and dynamic-application can't be applied to same policy In the same security policy is not supported. You can configure AppFW in the deprecatedĬonfiguring a traditional AppFW policy and a unified policy As a part of this change, the hierarchy and all the configuration optionsĪppFW functionality works if you continue to configure Rather than immediately removed-to provide backward compatibilityĪnd an opportunity to bring your configuration into compliance with Release 18.2R1 Application Firewall (AppFW) functionality is deprecated.
If you are planning to upgrade to Junos OS Release 18.2R1Īnd later releases, note the following points regarding using APPFWĪll existing AppFW related CLI statements and commands Use dynamic applications as match conditions as part of the existingĥ-tuple or 6-tuple (5-tuple with user firewall) match conditions to Unified policies are the security policies that enable you to VSRX instances support unified policies, allowing granular controlĪnd enforcement of Layer 7 dynamic applications within the traditional
Starting in Junos OS Release 18.2R1, SRX Series devices and